Revision as of 14:41, 27 October 2016

These are the new features in V18
These are the new features in V17
These were the new features in V16
These were the new features in V15

General

• program and documentation completely in English, French and German language
• toggle between schematic and PCB
• double screen operation
• real time data integration (forward-/back-annotation not neccessary)
• real time ground plane computation
• real time air wire optimization
• auto placer
• ELECTRA 250 pin auto router in every edition (more power optional)
• interface to specctra® via ELECTRA®
• contour auto router (shape based, gridless)
• hybrid auto router
• SQLite component database
• drag & drop component placement
• clipboard as a documentation interface
• intuitive Windows user interface
• free version “Discover” can be used as viewer
• viewer available separately
• undo/redo (50 steps)
• interfaces:
  • Gerber IN/OUT
  • XGerber IN/OUT
  • Smart Gerber (combines both)
  • Excellon IN/OUT
  • Sieb & Meyer OUT
  • DXF IN/OUT
  • PostScript OUT
  • Bitmap IN
  • ASCII (referenced open data-interface) IN/OUT
  • XML IN/OUT
  • generic HPGL out
  • STEP 3D OUT
  • IDF 3D OUT
  • GDS 2 OUT
  • EAGLE® IN/OUT
  • Protel® IN
• insulation milling as outline engraving (directly from the program!)
• maximum accuracy: vector graphics, resolution: 1nm = 1/1.000.000mm = 1/25.400.000 inch
• world coordinates: 1 inch on screen = 1 inch on PCB (when zoom = 100%)
• 2m x 2m PCB-/schematic area, up to 100 PCB layers, up to 100 schematic pages
• components in current project directly editable: change pad, modify package etc.
• flip-chips and ball-grid-arrays (BGAs) supported
• rotation by any angle e.g. chip on board technology
• free displacable tools
• hierarchical design by block diagrams
• generation of alternative assemblies in schematic and layout (variants)
• symbol assistant
• package assistant
• outline assistant for easy generation of outlines with breakouts
• outlines of any shape
• color code calculator for resistors and capacitors
• calculation of the track width for high current
• online help system
• frontpanel engraving tool
• texts in 3 languages simultaneously
• update manager for automatic program and driver updates
• automatic library updates
• alignment assistant (allows geometrical alignment of a certain number of identic components)

In schematic mode

• permanent forward-annotation to PCB
• more than 40,000 logic components (DIN/IEEE) in the database (internet access for db update needed)
• automatic component numbering
• inserted symbols still can be edited or adapted (independently from database)
• parametric search of components
• Component Management System (CMS)
• import of Mentor(R) and Orcad(R) netlists if needed
• output of individual component lists and netlists (also in Protel, Orcad and Calay format)
• Eagle(R) import and export (schematic files, board files) and library import to TARGET 3001!
• bill of material (BoM) with item number, purchase prices, deliverer etc. and custom fields
• up to 100 schematic pages each up to 4m²
• electrical design check ERC

In PCB mode

• permanent back-annotation to schematic
• component packages in the layout can be edited free at any time
• 2m X 2m (= 78.74In by 78.74 In)
• air wires continually updated in display to aid placing
• up to 100 layers (copper, solder stop, solder paste, gold etc.)
• any solder pad shapes: circular, octagonal, oblong, etc.
• any width of track, circular track, bezièr-curves, spirals, teardrops and custom padstacks
• configurable autoplacer
• interactive and automatic routing, gridless shape based contour auto router with tconnections (copper sharing) and maintaining of all design rules, single-, double- and multilayer routing, routing of SMDs, of components and of solder pads rotated at any angle
• new hybrid autorouter floating ground planes calculated in real time
• configurable real time design rule check (DRC)
• PCB generation and routing without schematic
• splitting a schematic off the layout
• Gerber file import for further edition (e.g. from other design software programs)
• lots of PCB houses directly accept TARGET *.T3001files
• formats *.tgr (Polar Instruments) and *. dif (digitaltest) supported (E-testing)
• 3D-view on button click
• format *.idf supported (transfer of 3D data to other mechanical CAD systems)
• generation of panels
• generation of testing points
• selection assistant (allows the selection by properties)
• list of the last 20 components used
• automatic PCB enquiries and –orders
• automatic component enquiries and –orders
• new layer tool with advanced layer-set- management
• 3D view

Assembly Service

• in cooperation with PCB-POOL®
• calculate the assembly of your board
• define where to purchase the parts
• use standard parts from PCB-Pool® stock
• add any own parts for assembly (welcome in a bag)
• automatic assembly from one(!) piece of PCB

Mixed mode simulation

• completely reviewed new graphical user interface
• Spice blocks no longer needed
• dialogues as assistants
• help in dialogues- with graphical explanations
• eased model edition
• model browser enlarged (with Syntax-Error messages also)
• Subcircuit Generator enlarged
• Level ("Simulation-group") new defined, generalized
• all basic simulator elements available in the library, virtual components too
• Component import (with model) in tree view technique possible
• PWL-Editor
• Graphical entry of PWL-curve
• interactive elements self definable:individual virtual instruments can be generated
• texts as value display
• filled objects as flashing elements
• rectangles as oscilloscopes
• MOSFETs: parameters L and W also implemented into the model card (PSPICE®-Syntax), so MOSFet-Models from manufacturers (Internet, gen PSPICE®-Syntax) can be imported SPICE3F5 and PSPICE® compatible
• Graphical entry of the circuit – circuit simulation interactive circuit symbols
• mixed mode simulation (analog + digital)
• Analyses: DC sweep, AC sweep and transient
• automatical control of step widths in transient analysis
• event driven digital simulator
• delay, setup, hold…
• times for digital basic elements
• postprocessor (oscilloscope) for view and analysis
• graphical subcircuit generator

EMC-analysis

• define several parameters concerning the PCB and concerning the already placed tracks
• critical tracks are automatially highlighted and checked with respect to their emissions and self interference
• PCB is checked against all EMC design rules whilst designing
• handling and evaluation of the results by Windows tree-view-technique
• calculations implemented: galvanic-, inductive-, capacitive- and radiation coupling
• computation of the coupling factor, wave resistance and maximum track length
• numerous tips for successful EMC-adequate PCB design.

Remark: The EMC tool tends to be an expert system rather than an exact analysis tool. Those tools play in a different league (!)

Front panel design

• use all drawing functions you already are familiar with
• no double entry of coordiantes
• superposed design of PCB and frontpanel
• huge amount of milling images ready for use
• digital print of your images on the front panel
• price calculation of the frontpanel when producing with WK-Mechanik
• price calculation of the frontpanel when producing with PCB-POOL® (incl. digital print)
• ordering instantly from TARGET 3001!

System requirements

• Operating System: Windows ME/NT4/2000/XP/Vista/Win7, Win8, Win10
• Recommended is AMD K6 or an Intel Pentium II or higher
• 64MB RAM, 128MB recommended
• Screen resolution: 1024x800 pixels, 256 colors, Open GL support (for 3D view)
• CD-ROM drive
• Internet access (needed for library server access, updates, commercial features and online communication to IBF)