Schematic

Features of the schematic tool in TARGET 3001!

A schematic is a sketch of an electrical logic. It shows the electrical connections between component symbols by the use of signal wires and busses. A schematic in TARGET 3001! can have up to 100 pages. A schematic can be transferred to a layout. You reach the schematic mode in TARGET 3001! using the icon:

How to create a schematic in TARGET 3001! (Crash Course)
How to import a component from the library browser
How to wire the pins of a component


Special: No forward/backward annotation (reannotate) between schematic and layout needed. Every change you make is noticed directly on the other side. Single source principle. No conflicts of project versions. Easy to learn: Nearly every command identical in schematic and PCB.

Characteristics of the schematic tool in TARGET 3001!:

• up to 100 pages in one schematic
• each 1.2m x 1.2m in size (equals 47.24 x 47.24 inches)
• extensive SQLite Component database containing over 40.000 logc symbolen DIN/IEEE (permanently growing
• free database updates (within the same version number)
• easy component search and placement of symbols with automatic numbering
• Component Management System with direct internet access to related data sheets
• symbols in the schematic can freely be edited at any time, independently from the database
• more than one schematic open at the same time - allows easy cut&paste between designs
• of assembly supported
• easy wiring by the use of a grid and "snap on" function in schematic and layout
• Schematic router
• shift highlighted schematic elements to a different schematic page on button click
• star shaped signals in schematic possible
• bus-assistant for easy placement of similar signals
• bring a schematic element to back- or foreground (context menu)
• currents in schematic can be displayed with values
• parts of a schematic can be saved as module
• easy reworking of a schematic: gate swap, pin swap
• renaming, renumbering as well as pin and gate swap automated in schematic and layout
• Check project|electrical rule check]]
• connecting a signal to another in the schematic does the same in the layout
• read in of netlists in OrCAD*-Multiwire and Mentor*-format, TARGET-ASCII and Gerber*-format
• you can create a netlist, but there's no need to. TARGET 3001! stores schematic and PCB in one project file.
• individual creation of BoMs and netlists in Protel*, OrCAD* and Calay* format
• individual creation of Boms and netlists for your purchasing dept, for E-Test or assembling automats, with ordering numbers, prices or customized individual properties
• parts of the schematic can be copied for other jobs
• pSpice compatible simulation included
• your project documentations in three languages possible
• images in schematic/layout possible
• Printing of the schematic by the print dialog in menu "File".

The meaning of "Schematic" in TARGET 3001!

.