Difference between revisions of "GenCAD"
Line 7: | Line 7: | ||
*The solderstop mask can have additions | *The solderstop mask can have additions | ||
*Puts out packages "Without FLIP" in the SHAPE call | *Puts out packages "Without FLIP" in the SHAPE call | ||
− | *Arcs in the board outline are split into short chords because some viewers do not implement | + | *Arcs in the board outline are split into short chords because some viewers do not implement ARCs |
*Signal polygons are passed as PLANEs | *Signal polygons are passed as PLANEs | ||
*Alphanumeric pad names can be specified instead of just the pin number | *Alphanumeric pad names can be specified instead of just the pin number |
Latest revision as of 17:09, 7 April 2021
Find a filter towards this format in Menu File/Input-Output Formats/production/GenCAD export...
- Allows you to save your *.T3001 project in the GenCAD format *.cad
- Shapes of pads are accurately mapped
- Solder paste and solderstop mask are included to the output
- The solderstop mask can have additions
- Puts out packages "Without FLIP" in the SHAPE call
- Arcs in the board outline are split into short chords because some viewers do not implement ARCs
- Signal polygons are passed as PLANEs
- Alphanumeric pad names can be specified instead of just the pin number
The functions were made in cooperation with several PCB manufacturers and a CAM software manufacturer and have been tested under DFM aspects.