Revision as of 15:35, 22 May 2019 (view source) Markus Friedrich (talk | contribs) ← Older edit		Revision as of 15:53, 31 March 2021 (view source) Markus Friedrich (talk | contribs) Newer edit →
Line 2:		Line 2:
−	It allows a "Save" of your *.t3001 file in GenCAD format *.cad:<br>	+	*Allows you to save your *.T3001 project in the GenCAD format *.cad
−		+	*Shapes of pads are accurately mapped
−		+	*Alphanumeric pad names can be specified instead of just the pin number
−	[[Image:Gencad_e2.jpg|none]]<br>	+	*Solder paste and solder mask are included in the output
−		+	*puts out packages without FLIP in the SHAPE call
−	Alphanumeric pad names are possible unlike before (only pin numbers).<br>Can also output package without FLIP in the SHAPE command.	+	*Arcs in the board outline are split into short chords because some viewers do not implement ARCs
		+	*Signal polygons are passed as PLANEs
		+	<br>
		+	[[Image:Gencad_e2.jpg|none]]Image: Example project in GenCAD format<br>
		+	<br><br>

---

Revision as of 15:53, 31 March 2021

Find a filter towards this format in Menu File/Input-Output Formats/production/GenCAD export...

• Allows you to save your *.T3001 project in the GenCAD format *.cad
• Shapes of pads are accurately mapped
• Alphanumeric pad names can be specified instead of just the pin number
• Solder paste and solder mask are included in the output
• puts out packages without FLIP in the SHAPE call
• Arcs in the board outline are split into short chords because some viewers do not implement ARCs
• Signal polygons are passed as PLANEs

Image: Example project in GenCAD format