Difference between revisions of "GenCAD"
(13 intermediate revisions by the same user not shown) | |||
Line 2: | Line 2: | ||
− | + | *Allows you to save your *.T3001 project in the GenCAD format *.cad | |
+ | *Shapes of pads are accurately mapped | ||
+ | *Solder paste and solderstop mask are included to the output | ||
+ | *The solderstop mask can have additions | ||
+ | *Puts out packages "Without FLIP" in the SHAPE call | ||
+ | *Arcs in the board outline are split into short chords because some viewers do not implement ARCs | ||
+ | *Signal polygons are passed as PLANEs | ||
+ | *Alphanumeric pad names can be specified instead of just the pin number | ||
+ | <br> | ||
+ | The functions were made in cooperation with several PCB manufacturers and a CAM software manufacturer and have been tested under [https://en.wikipedia.org/wiki/Design_for_manufacturability DFM] aspects. | ||
+ | <br><br> | ||
+ | [[Image:Gencad_e2.jpg|none]]Image: Example project in GenCAD format<br> | ||
− | + | <br><br> | |
− | |||
− | |||
− | |||
Latest revision as of 17:09, 7 April 2021
Find a filter towards this format in Menu File/Input-Output Formats/production/GenCAD export...
- Allows you to save your *.T3001 project in the GenCAD format *.cad
- Shapes of pads are accurately mapped
- Solder paste and solderstop mask are included to the output
- The solderstop mask can have additions
- Puts out packages "Without FLIP" in the SHAPE call
- Arcs in the board outline are split into short chords because some viewers do not implement ARCs
- Signal polygons are passed as PLANEs
- Alphanumeric pad names can be specified instead of just the pin number
The functions were made in cooperation with several PCB manufacturers and a CAM software manufacturer and have been tested under DFM aspects.