Documentation

Difference between revisions of "Drilling Plan with Pictograms"

Line 3: Line 3:
 
Here please create the pictograms of the drill plan. TARGET 3001! uses 20 different pictograms (figures) for 20 different drill hole diameters. Also, an ASCII-text-file with information regarding the assignment of the pictograms to the individual drill hole diameters is created. For example:<br><br><br>
 
Here please create the pictograms of the drill plan. TARGET 3001! uses 20 different pictograms (figures) for 20 different drill hole diameters. Also, an ASCII-text-file with information regarding the assignment of the pictograms to the individual drill hole diameters is created. For example:<br><br><br>
  
[[Image:Drillpictlegend.jpg|none]]<br><br>
+
[[Image:Drillpictlegend_e.jpg|none]]<br><br>
  
 
The creation of graphical pictograms is used to control individual drill hole diameters on a non-automatic drilling (manual drilling). The size of the pictograms can be edited in the "Settings/Settings/Options" command. You should create an output of the drill holes as pictogram shortly after you entered the values. The legend information does not refresh in real time. So if you make changes, please generate the drill plan new.<br><br>
 
The creation of graphical pictograms is used to control individual drill hole diameters on a non-automatic drilling (manual drilling). The size of the pictograms can be edited in the "Settings/Settings/Options" command. You should create an output of the drill holes as pictogram shortly after you entered the values. The legend information does not refresh in real time. So if you make changes, please generate the drill plan new.<br><br>

Revision as of 11:05, 16 June 2021

Menu File / Input/Output Formats / Production / "Drilling Plan with Pictograms"

Here please create the pictograms of the drill plan. TARGET 3001! uses 20 different pictograms (figures) for 20 different drill hole diameters. Also, an ASCII-text-file with information regarding the assignment of the pictograms to the individual drill hole diameters is created. For example:


Drillpictlegend e.jpg


The creation of graphical pictograms is used to control individual drill hole diameters on a non-automatic drilling (manual drilling). The size of the pictograms can be edited in the "Settings/Settings/Options" command. You should create an output of the drill holes as pictogram shortly after you entered the values. The legend information does not refresh in real time. So if you make changes, please generate the drill plan new.