Insert image

Inserting an image into the schematic

You would like to have a logo or similar in your schematic, for documentation purposes or to give your drawing a special look. You should have a corresponding image at hand. Supported image formats are BMP, GIF, JPG, JPEG, PNG, TIF, TIFF. In our example we use the TargetLogo200weiss.jpg.


Image: This image is to be printed in schematic and layout.

In this case, the file format is *.jpg in a size of 200 x 63 pixels. The higher the resolution, the sharper the image in the project. It is up to you which resolution and dimensions you use. Experience has shown that the images used are rather small, because you mostly want to place your logo at a certain position.

To insert, use the menu item: Actions/Insert image.... The following dialog opens:

Image: The dialog "Load picture into rectangle"

Now select the desired image from your directory, in our case it is the TARGETlogo200weiss. jpg. Before that, you determine the size in height and width, just as you want it to be in the schematic. If you set the check mark to "proportional", then you only need to determine either the height or the width. The other value results automatically from the dimensions of the image. Click on the button "Create image" in the dialog. The lower left corner of the position frame now is fixed to the cursor and can be dropped with a mouse click.


Image: Position frame of the image

Image: The desired image is inserted to the schematic

A new click on the picture will bring up the picture frame with black touchpads at the corners and in the middle. At one of these, you can stretch or compress the image. If held at a border line segment, the image can be moved. Double-clicking on the picture opens the dialog "Change rectangles". This refers to the rectangular border around the image. If you change the rectangle height and width in this dialog box, the size of the image will change accordingly.

Inserting an image into the layout

Print on paper

In the layout view, proceed as described for the schematic, the function is identical.

Image: Logo in a paper print of the layout

If you print your layout with logo on any printer, you will get the following picture:

Image: Logo in a paper print of the layout (300%)

Print of copper

No Gerber data can be created from colored images on layouts, nor can they be displayed in Postscript. If you want to display the contours of a logo on a front panel or on your printed circuit board in copper, it is best to have your logo as a high-contrast bitmap (*. bmp) in sharp black and white, like this:

Image: TARGET-Logo black and white (Note: For loading speed reasons this picture is a *. png, not a *.bmp)

Now you have to generate this bitmap into the database like a component package.

Select menu item:

Image: Menu path to create an image as a symbol or a package

Load the black and white bitmap by the dialog box that opens.

Bild: Bitmap-to-Target converter

By clicking on the radio button, determine that the bitmap should appear in the board, i. e. in the layout in the sense of a "package". It is also possible to create the image for the schematic, in the sense of a "symbol"..

Our image has a width of 200 pixels. If we determine a pixel with as of 0.05 mm in TARGET, the real size of the logo on the PCB will be 10.00 mm (one centimeter). After conversion, the package browser opens and offers us the image for an immediate import into the PCB.



Image: The package dialog immediately suggests the import of the logo into the layout.

Image: Scale component dialog: We take over the image at 100%, thus non scaled.

The image now is fixed to the cursor and can be placed anywhere on the copper side that is currently activated. In our example layer 16, copper top, blue.

Bild: Layout mit TARGET Logo auf Ebene 16, Kupfer oben, blau.

If you want to have it on copper bottom, i. e. layer 2, copper bottom, red, you just have to mark it and mirror it with keyboard key [m]. Mirror axis is the cursor position. When mirroring, hold the cursor in the middle of the logo. If you move the cursor too far away, the image might move out of screen. You can select it at any time and move it with mouse key held.

If you now create a ground plane over the whole board on layer 16 (menu: Actions/Ground planes/Entire PCB area...), you will get the following picture:

Image: Copper logo embedded to a ground plane

As deletion from a copper plane

To do this, you should have created a ground plane on the copper layer in question. Now simply bring the logo to the appropriate "Deletion"- layer . So in our case it is layer 15, Deletion top.

Logo brought to the deletion layer.

The finer your image is, the more difficult it is to let copper flow around it. Keep in mind that Gerber data is the basis for a light exposure process. Light pens, which move according to the tracks of the the layout on a photo-sensitive plate, always have a certain line width (=aperture). If this line width is too large or cannot be reduced in terms of production technology, the tools do not work well in all corners. Orphan ground areas (signal islands) are left out completely if necessary. The results then are not convincing. In addition, deletions from a ground plane can always cause electromagnetic irritations. We therefore tend to advise against this.

Alternatively, you could place a rectangle in the delete layer and then again put the logo in copper on it.

Logo in copper drawn on a rectangle of deletion

Ein Bild als Designvorlage verwenden

Ein Foto eines vorliegenden Leiterplattendesigns

Sie haben von einem früheren Projekt nur noch die Platine und keinerlei Layout-Datenmaterial. Jetzt würden Sie gerne ein Bild Ihrer Platine als "Malvorlage" in Ihr Layout importieren um Bauteile entsprechend zu platzieren und Leiterbahnen Stück für Stück nachzuzeichnen. Das geht sehr leicht. Bitte lesen Sie mehr dazu im Artikel Reverse Engineering.

Bilddaten (DXF) eines Platinenumrisses

Hierzu betrachten Sie bitte den Artikel DXF

Ein Logo auf eine Frontplatte fräsen

Mehr darüber finden Sie auch im Artikel: Ein Logo auf eine Frontplatte fräsen Der Prozess ist identisch. Tauschen Sie einfach die Frontplattenlage gegen eine Kupferlage.




Kategorie:SchaltplanKategorie:LayoutKategorie:Elemente Kategorie:Aktionen