Bill of Material BOM

General

See Menu "File"/Input/Output Formats/File transfer/Documentation/"Output Bill of Material"

The Bill of Material (BOM) is a text file which contains the parts you have used in the layout. It shows line by line the entries you had chosen earlier from an editing dialog. IMPORTANT: A BOM only appears if the component packages are placed within an outline of a PCB layout. In other words: No BOM without a layout.

The parameters of the Bill of Material (BoM)

The bill of material (BOM) is created as a text file with entries line by line. TARGET 3001! first gathers all properties of the components used to a list which you see in the dialog. Now tick the boxes of the properties you'd like to mention in your BOM (e. g. item number, manufacturer, distributor...)

In contrast to the entries from "Number 1,2,3" to "Value" the other fields have an entry only if the corresponding property is established as such. The entries "Rotation in °", "Position on bottom /on top", "Position [mm]" are meant for automatic assembly only. The position in mm represents the coordinates of the packages' handle cross. The BoM will be created as a text file *.stk (alternatively *.csv or *.xls). It will be read line by line and can be interpreted by a normal text editor.

If you have variants of assembly with one project, you maybe like to create BoMs referring to each of the variant. Use the following syntax:

#V = Name of the variant
#T = The button pushed latest in the layer toolbar
#R = The project variable REVISION
#N = Project file name
#D = Project directory

For the fact that you might have several variants you may consider to give the BoMs separate file names. For this reason use button "File" do decide where to save and how to name.

The list of the BoM

The following example is made from the project dice.T3001 using the default settings:

Entries like "Part number" or "Price" will only be available in the BOM, if data have been entered to the corresponding "Component property"-line.

Create a new property to be listed in the BoM

By a mouse click M11 on the handle of a schematic symbol the dialog "Change Symbols" opens. Click M1 on the "Properties" button in order to define the properties of the component based on a list, see image. You alternatively can do it by the database browser properties management. If the component property BILL_OF_MATERIAL shows NO the part won't be listed in the BOM. Write this property in the way shown directly to the list of properties by hand. In the following example this entry does not appear so this part would be listed in the BOM.

Image: The dialog "Change properties"

A click M11 to the empty line at the bottom of the list (arrow) allows the establishing of new and individual properties which later can be listed in the BOM. After all properties of a part have been entered, select menu File/Input/Output Formats/File transfer/Documentation/"Bill of Material". Component ID, Package ID and manufacturer can be listed since TARGET 3001! V15.3.0.65. Now TARGET 3001! generates a list in a text file (for example: test.stk) containing all parts used on your PCB.

Only some parts of the schematic in the BoM

Maybe you would like to have only some parts of your schematic be part of the BoM. Maybe thoseof a certein schematic page. As mentioned above only parts being placed on the layout can become part of the BoM. That means what you get in the BoM is defined by what you have placed in the layout.

You could create modules to select the components you want: Select all components on a schematic page and use menu point "Group as a module" (see menu on image 1). Give the module a meaningful name and then select it in the BOM dialog:

Image: Select a certain module in the BoM.

Another idea is to use the autoplacer when the layout is empty: It allows the placement of parts only of a certain schematic page. See layout menu Actions/Launch Autoplacer. Now create the BoM.

Summarize equal components (by component values)

Image: The menu item Summarize equal components (by component values).

Equal components (by component values) are summarized only if the following component parameters are identical in the project:

• Component value
• Prefix
• The component property USED_PACKAGE
• The component property COMPONENT_NAME