Documentation

Printing script format

If each of your projects requires the printing of a certain set of layer configurations, it can be time consuming and prone to errors to configurate the printer new every time. In such situation it is easier to control the printing by the use of a written command (script). How such a script in TARGET 3001! might look like is explained here.

The TARGET 3001! printings can comfortably be controlled by a script language. One script can create several different printings. Every line contains one command. The script commands reflect the settings in the printing dialog. Each line not starting with a key word automatically is recognized as a comment line.

The key words and the command syntax of the TARGET 3001! print scripts are illustrated as follows:


Clear

sets the standard settings:
- not rotated
- not mirrored
- not inverted
- black and white, if schematic
- 1 copy
- blackness 100%
- not only centering drills
- no pictograms
- no background color
- print groundplane lines
- PCB outline counts, if board
- not fit to page
- centered
- scale 100%
- offsetX 0
- offsetY 0
- correction X 1
- correction Y 1
- all pages, if schematic
- no variants
- variant components not invisible
- layers are not subject to change


Printer=Name,Duplex,A4

Select printer by it's name, if applicable Duplex or paper size A5-A2, Legal, Letter, CSheet, DSheet, ESheet


Name=Job

Denominate print job, therefore assign name of the print job
The following keywords will be replaced:
- #P by the project name without extention
- #F by the file name with extention
- #D by the current date yyyy-mm-dd
- #T by the current time hh-mm
- #V by the name of the variant
- #R by the name of the revision
- #Q by the name of the variant-revision


Path=C:\Test\...

Assume path for the output file (works since V16.5.0.55 and only with the PDF printer FreePDF-XP). The same keywords will be replaced like in "Name=".


Print

Execute print job, print sheet(s). If "PDF" can be found in the Printer's name, you are asked after the "Print" command, whether the printer is ready again.


Portrait

Sheet in portrait


Landscape

Sheet in landscape


Mirror=True/False

Mirror?


Inverted=True/False

Invert?


Color=True/False

Black-white?


Copies=1

Number of copies


Blackness=100

Grade of blackness in percent


SmallDrill=True/False

Only centering drillings?


Pictograms=True/False

Drillings as pictograms?


BackGround=True/False

Print background color?


GroundLines=True/False

Print ground lines?


PCBOutline=True/False

PCB outline counts?


SheetFit=True/False

Fit to sheet?


Center=True/False

Centering to the sheet?


Scale=100

Scale in percent


OffsetX=0

Horizontal offset in mm


OffsetY=0

Vertical offset in mm


CorrectX=1.0

Horizontal adjustment factor


CorrectY=1.0

Vertical adjustment factor


Pages=All/1-3

Which pages get printed? All; 1-3 (= pages one to three)


Variants=True/False

Print variants?


HideVariant=True/False

Shall variant parts be faded out?


Variant=Clear/Special

Print this variant as well. The name of the variant will be passed. Clear = reset all variants


LayerOff=All/0,1,2,23

These layers will be faded out. All = all


LayerOn=0,1,2,23

These layers will be faded in


LayerButton=3

This programmed layer button in the sidebar will be pressed and the layers contained get faded in


ShowNames=True/False

Show the component names in schematic view?


ShowValues=True/False

Show the component values in schematic view?


View=SCH/PCB

Toggle to the schematic or PCB view.