Documentation

Difference between revisions of "Command line"

 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
TARGET 3001! can also be opened by command line parameters:<br><br>
 
TARGET 3001! can also be opened by command line parameters:<br><br>
File named filepath opens:
+
File named filepath is opened:
  TarV19.exe filepath
+
  TarV32.exe filepath
File with the name filepath is opened, eBeam file is put out, TARGET is closed:
+
File with the name filepath is opened, '''eBeam file''' is put out, TARGET is closed:
  TarV19.exe filepath -e
+
  TarV32.exe filepath -e
File with the name filepath is opened, part file with the extension .CMP is created, TARGET is closed:
+
File with the name filepath is opened, '''component file''' showing extension .CMP is created, TARGET is closed:
  TarV19.exe filepath -c
+
  TarV32.exe filepath -c
file with the name filepath is opened, part text file filepath2 is created, TARGET is closed:
+
file with the name filepath is opened, '''component text file''' filepath2 (optionally also filepath3) is created, TARGET is closed:
  TarV19.exe filepath -k filepath2
+
  TarV32.exe filepath -k filepath2 filepath3
File with the name filepath is opened, Pov-Ray file with the extension .POV is created, TARGET is closed:
+
File with the name filepath is opened, '''Pov-Ray file''' showing extension .POV is created, TARGET is closed:
  TarV19.exe filepath -p filepath2 -X -X -X
+
  TarV32.exe filepath -p filepath2 -X -X -X
 
The following parameters are available for -X:
 
The following parameters are available for -X:
 
  -st = Stencil Top
 
  -st = Stencil Top
Line 19: Line 19:
 
  -nss = No Silk Screen
 
  -nss = No Silk Screen
 
  -pi = Progress Info File progress.txt
 
  -pi = Progress Info File progress.txt
File with the name filepath is opened, board info file with the extension .txt is created, TARGET is closed:
+
File with the name filepath is opened, '''board info file''' showing extension .txt is created, TARGET is closed:
  TarV19.exe filepath -i
+
  TarV32.exe filepath -i
File with the name filepath is opened, STEP file with the extension .step is created, TARGET is closed:
+
File with the name filepath is opened, '''STEP file''' showing extension .step is created, TARGET is closed. The optional -nwp is no wires/pads:
  TarV19.exe filepath -stp
+
  TarV32.exe filepath -stp -nwp
File named filepath is opened, XGerber and Excellon files are created, TARGET is closed:
+
File named filepath is opened, '''XGerber and Excellon files''' are created, TARGET is closed:
  TarV19.exe filepath -g
+
  TarV32.exe filepath -g
 +
File named filepath is opened, '''ODB++ file''' is created, TARGET is closed (as of V32.2.0.18):
 +
TarV32.exe filepath -o
 +
File named filepath is opened, '''BOM''' is created, TARGET is closed:
 +
TarV32.exe filepath -b
 +
File named filepath is opened, BOM (+Pick&Place) is created as '''JSON format''', TARGET is closed:
 +
TarV32.exe filepath -j
 +
File named filepath is opened, '''IPC356 netlist''' is created, TARGET is closed:
 +
TarV32.exe filepath -356
 +
File named filepath is opened, '''Pick&Place list''' is created, TARGET is closed:
 +
TarV32.exe filepath -pp
  
  

Latest revision as of 16:14, 14 September 2023

TARGET 3001! can also be opened by command line parameters:

File named filepath is opened:

TarV32.exe filepath

File with the name filepath is opened, eBeam file is put out, TARGET is closed:

TarV32.exe filepath -e

File with the name filepath is opened, component file showing extension .CMP is created, TARGET is closed:

TarV32.exe filepath -c

file with the name filepath is opened, component text file filepath2 (optionally also filepath3) is created, TARGET is closed:

TarV32.exe filepath -k filepath2 filepath3

File with the name filepath is opened, Pov-Ray file showing extension .POV is created, TARGET is closed:

TarV32.exe filepath -p filepath2 -X -X -X

The following parameters are available for -X:

-st = Stencil Top
-sb = Stencil Bottom
-nc = No Components
-b = Backside
-h = HAL statt ENIG
-nst = No Solder Stop
-nss = No Silk Screen
-pi = Progress Info File progress.txt

File with the name filepath is opened, board info file showing extension .txt is created, TARGET is closed:

TarV32.exe filepath -i

File with the name filepath is opened, STEP file showing extension .step is created, TARGET is closed. The optional -nwp is no wires/pads:

TarV32.exe filepath -stp -nwp

File named filepath is opened, XGerber and Excellon files are created, TARGET is closed:

TarV32.exe filepath -g

File named filepath is opened, ODB++ file is created, TARGET is closed (as of V32.2.0.18):

TarV32.exe filepath -o

File named filepath is opened, BOM is created, TARGET is closed:

TarV32.exe filepath -b

File named filepath is opened, BOM (+Pick&Place) is created as JSON format, TARGET is closed:

TarV32.exe filepath -j

File named filepath is opened, IPC356 netlist is created, TARGET is closed:

TarV32.exe filepath -356

File named filepath is opened, Pick&Place list is created, TARGET is closed:

TarV32.exe filepath -pp


alias: commandline comandline comand lineen:Command line