Command line
TARGET 3001! can also be opened by command line parameters:
File named filepath is opened:
TarV32.exe filepath
File with the name filepath is opened, eBeam file is put out, TARGET is closed:
TarV32.exe filepath -e
File with the name filepath is opened, component file showing extension .CMP is created, TARGET is closed:
TarV32.exe filepath -c
file with the name filepath is opened, component text file filepath2 is created, TARGET is closed:
TarV32.exe filepath -k filepath2
File with the name filepath is opened, Pov-Ray file showing extension .POV is created, TARGET is closed:
TarV32.exe filepath -p filepath2 -X -X -X
The following parameters are available for -X:
-st = Stencil Top -sb = Stencil Bottom -nc = No Components -b = Backside -h = HAL statt ENIG -nst = No Solder Stop -nss = No Silk Screen -pi = Progress Info File progress.txt
File with the name filepath is opened, board info file showing extension .txt is created, TARGET is closed:
TarV32.exe filepath -i
File with the name filepath is opened, STEP file showing extension .step is created, TARGET is closed. The optional -nwp is no wires/pads:
TarV32.exe filepath -stp -nwp
File named filepath is opened, XGerber and Excellon files are created, TARGET is closed:
TarV32.exe filepath -g
File named filepath is opened, ODB++ file is created, TARGET is closed (as of V32.2.0.18):
TarV32.exe filepath -o
File named filepath is opened, BOM is created, TARGET is closed:
TarV32.exe filepath -b
File named filepath is opened, BOM (+Pick&Place) is created as JSON format, TARGET is closed:
TarV32.exe filepath -j
File named filepath is opened, IPC356 netlist is created, TARGET is closed:
TarV32.exe filepath -356
File named filepath is opened, Pick&Place list is created, TARGET is closed:
TarV32.exe filepath -pp
alias: commandline comandline comand lineen:Command line