Documentation

Command line

TARGET 3001! can also be openeded with command line parameters:

File named filepath opens:

TarV19.exe filepath

File with the name filepath is opened, eBeam file is put out, TARGET is closed:

TarV19.exe filepath -e

File with the name filepath is opened, part file with the extension .CMP is created, TARGET is closed:

TarV19.exe filepath -c

file with the name filepath is opened, part text file filepath2 is created, TARGET is closed:

TarV19.exe filepath -k filepath2

File with the name filepath is opened, Pov-Ray file with the extension .POV is created, TARGET is closed:

TarV19.exe filepath -p filepath2 -X -X -X

The following parameters are available for -X:

-st = Stencil Top
-sb = Stencil Bottom
-nc = No Components
-b = Backside
-h = HAL statt ENIG
-nst = No Solder Stop
-nss = No Silk Screen
-pi = Progress Info File progress.txt

File with the name filepath is opened, board info file with the extension .txt is created, TARGET is closed:

TarV19.exe filepath -i

File with the name filepath is opened, STEP file with the extension .step is created, TARGET is closed:

TarV19.exe filepath -stp

File named filepath is opened, XGerber and Excellon files are created, TARGET is closed:

TarV19.exe filepath -g


alias: commandline comandline comand lineen:Command line