Documentation

Command line: Difference between revisions

No edit summary
No edit summary
Line 1: Line 1:
TARGET 3001! can also be opened by command line parameters:<br><br>
TARGET 3001! can also be opened by command line parameters:<br><br>
File named filepath is opened:
File named filepath is opened:
  TarV19.exe filepath
  TarV31.exe filepath
File with the name filepath is opened, eBeam file is put out, TARGET is closed:
File with the name filepath is opened, eBeam file is put out, TARGET is closed:
  TarV19.exe filepath -e
  TarV31.exe filepath -e
File with the name filepath is opened, component file showing extension .CMP is created, TARGET is closed:
File with the name filepath is opened, component file showing extension .CMP is created, TARGET is closed:
  TarV19.exe filepath -c
  TarV31.exe filepath -c
file with the name filepath is opened, component text file filepath2 is created, TARGET is closed:
file with the name filepath is opened, component text file filepath2 is created, TARGET is closed:
  TarV19.exe filepath -k filepath2
  TarV31.exe filepath -k filepath2
File with the name filepath is opened, Pov-Ray file showing extension .POV is created, TARGET is closed:
File with the name filepath is opened, Pov-Ray file showing extension .POV is created, TARGET is closed:
  TarV19.exe filepath -p filepath2 -X -X -X
  TarV31.exe filepath -p filepath2 -X -X -X
The following parameters are available for -X:
The following parameters are available for -X:
  -st = Stencil Top
  -st = Stencil Top
Line 20: Line 20:
  -pi = Progress Info File progress.txt
  -pi = Progress Info File progress.txt
File with the name filepath is opened, board info file showing extension .txt is created, TARGET is closed:
File with the name filepath is opened, board info file showing extension .txt is created, TARGET is closed:
  TarV19.exe filepath -i
  TarV31.exe filepath -i
File with the name filepath is opened, STEP file showing extension .step is created, TARGET is closed. The optional -nwp is no wires/pads:
File with the name filepath is opened, STEP file showing extension .step is created, TARGET is closed. The optional -nwp is no wires/pads:
  TarV19.exe filepath -stp -nwp
  TarV31.exe filepath -stp -nwp
File named filepath is opened, XGerber and Excellon files are created, TARGET is closed:
File named filepath is opened, XGerber and Excellon files are created, TARGET is closed:
  TarV19.exe filepath -g
  TarV31.exe filepath -g
File named filepath is opened, BOM is created, TARGET is closed:
File named filepath is opened, BOM is created, TARGET is closed:
  TarV19.exe filepath -b
  TarV31.exe filepath -b
File named filepath is opened, IPC356 netlist is created, TARGET is closed:
File named filepath is opened, IPC356 netlist is created, TARGET is closed:
  TarV19.exe filepath -356
  TarV31.exe filepath -356
File named filepath is opened, Pick&Place list is created, TARGET is closed:
TarV31.exe filepath -pp





Revision as of 21:16, 2 January 2022

TARGET 3001! can also be opened by command line parameters:

File named filepath is opened:

TarV31.exe filepath

File with the name filepath is opened, eBeam file is put out, TARGET is closed:

TarV31.exe filepath -e

File with the name filepath is opened, component file showing extension .CMP is created, TARGET is closed:

TarV31.exe filepath -c

file with the name filepath is opened, component text file filepath2 is created, TARGET is closed:

TarV31.exe filepath -k filepath2

File with the name filepath is opened, Pov-Ray file showing extension .POV is created, TARGET is closed:

TarV31.exe filepath -p filepath2 -X -X -X

The following parameters are available for -X:

-st = Stencil Top
-sb = Stencil Bottom
-nc = No Components
-b = Backside
-h = HAL statt ENIG
-nst = No Solder Stop
-nss = No Silk Screen
-pi = Progress Info File progress.txt

File with the name filepath is opened, board info file showing extension .txt is created, TARGET is closed:

TarV31.exe filepath -i

File with the name filepath is opened, STEP file showing extension .step is created, TARGET is closed. The optional -nwp is no wires/pads:

TarV31.exe filepath -stp -nwp

File named filepath is opened, XGerber and Excellon files are created, TARGET is closed:

TarV31.exe filepath -g

File named filepath is opened, BOM is created, TARGET is closed:

TarV31.exe filepath -b

File named filepath is opened, IPC356 netlist is created, TARGET is closed:

TarV31.exe filepath -356

File named filepath is opened, Pick&Place list is created, TARGET is closed:

TarV31.exe filepath -pp


alias: commandline comandline comand lineen:Command line