Insert a D-form breakout: Difference between revisions
No edit summary |
No edit summary |
||
| Line 19: | Line 19: | ||
[[Image:FP_D-Ausbruch_e. | [[Image:FP_D-Ausbruch_e.jpg|none]] | ||
'''Image 2:''' D-form breakout with 200 mil diameter and width of 160 mil. | '''Image 2:''' D-form breakout with 200 mil diameter and width of 160 mil. | ||
Revision as of 11:56, 7 October 2015
This article is part of a TARGET 3001! Crash Course Frontpanel.
After clicking the icon 
the following dialog appears:
Image 1: The dialog: "Insert a D-form breakout"
A D-form breakout is a circle with a flattening. D-form breakouts are used for numerous purposes, e. g. for top mounted jacks to avoid twisting.
"Diameter" means the circular object.
"Width" means the distance between the outline of the circle and the flattening. The width can only achieve values between radius and diameter.
"Rotation" rotates the figure counter clockwise according to degrees entered.
NOTE: Inner corners can not be sharp but always are rounded according to the radius of the tool in use.
Image 2: D-form breakout with 200 mil diameter and width of 160 mil.