GenCAD: Difference between revisions
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
*Allows you to save your *.T3001 project in the GenCAD format *.cad | *Allows you to save your *.T3001 project in the GenCAD format *.cad | ||
*Shapes of pads are accurately mapped | *Shapes of pads are accurately mapped | ||
*Solder paste and solderstop mask are included to the output | |||
*The solderstop mask can have additions | |||
*Puts out packages "Without FLIP" in the SHAPE call | |||
*Arcs in the board outline are split into short chords because some viewers do not implement Arcs | |||
*Signal polygons are passed as PLANEs | |||
*Alphanumeric pad names can be specified instead of just the pin number | *Alphanumeric pad names can be specified instead of just the pin number | ||
The functions were made in cooperation with several PCB manufacturers and a CAM software manufacturer and have been tested under [https://en.wikipedia.org/wiki/Design_for_manufacturability DFM] aspects. | The functions were made in cooperation with several PCB manufacturers and a CAM software manufacturer and have been tested under [https://en.wikipedia.org/wiki/Design_for_manufacturability DFM] aspects. | ||
Revision as of 15:19, 7 April 2021
Find a filter towards this format in Menu File/Input-Output Formats/production/GenCAD export...
- Allows you to save your *.T3001 project in the GenCAD format *.cad
- Shapes of pads are accurately mapped
- Solder paste and solderstop mask are included to the output
- The solderstop mask can have additions
- Puts out packages "Without FLIP" in the SHAPE call
- Arcs in the board outline are split into short chords because some viewers do not implement Arcs
- Signal polygons are passed as PLANEs
- Alphanumeric pad names can be specified instead of just the pin number
The functions were made in cooperation with several PCB manufacturers and a CAM software manufacturer and have been tested under DFM aspects.
Image: Example project in GenCAD format