Alignment: Difference between revisions
No edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
Maybe you wish to align some symbols or packages in a column or in a row. In other words | Maybe you wish to align some symbols or packages in a column or in a row. In other words you'd like to align to a certain X or Y coordinate. The following example illustrates the principle: <br><br> | ||
'''Example:''' Four resistors shall be aligned. They need to be highlighted and the key [e] for edition needs to be used. The following dialog will open: | '''Example:''' Four resistors shall be aligned to the same level. They need to be highlighted and the key [e] for edition needs to be used. The following dialog will open: | ||
[[Image:alignment_e_1.jpg|Alignment to a certain Y-coordinate]]<br>Image: Tick the box ''Symbol'' at the bottom of the left side of the dialog and press OK.<br><br> | [[Image:alignment_e_1.jpg|Alignment to a certain Y-coordinate]]<br>Image: Tick the box ''Symbol'' at the bottom of the left side of the dialog and press OK.<br><br> | ||
Now the dialog "Change symbols" opens.<br><br> | Now the dialog "Change symbols" opens.<br><br> | ||
[[Image:alignment_e_2.jpg|Alignment to a certain Y-coordinate]]<br>Image: Enter the value of the Y-coordinate for a bare alignment in Y-direction. Press OK.<br><br> | [[Image:alignment_e_2.jpg|Alignment to a certain Y-coordinate]]<br>Image: Enter the value of the Y-coordinate and use the option for a bare alignment in Y-direction. Press OK.<br><br> | ||
[[Image:alignment_e_3.jpg|Result]]<br>Image: Result: All parts have the same Y-coordinate.<br><br> | [[Image:alignment_e_3.jpg|Result]]<br>Image: Result: All parts have the same Y-coordinate.<br><br> | ||
Revision as of 15:19, 20 April 2017
Maybe you wish to align some symbols or packages in a column or in a row. In other words you'd like to align to a certain X or Y coordinate. The following example illustrates the principle:
Example: Four resistors shall be aligned to the same level. They need to be highlighted and the key [e] for edition needs to be used. The following dialog will open:
Image: Tick the box Symbol at the bottom of the left side of the dialog and press OK.
Now the dialog "Change symbols" opens.
Image: Enter the value of the Y-coordinate and use the option for a bare alignment in Y-direction. Press OK.
Image: Result: All parts have the same Y-coordinate.
Act in the same way to align a bunch of symbols or packages at a certain X-coordinate.
en:Alignment