Documentation

Latest revision as of 16:09, 7 April 2021

Find a filter towards this format in Menu File/Input-Output Formats/production/GenCAD export...

Allows you to save your *.T3001 project in the GenCAD format *.cad
Shapes of pads are accurately mapped
Solder paste and solderstop mask are included to the output
The solderstop mask can have additions
Puts out packages "Without FLIP" in the SHAPE call
Arcs in the board outline are split into short chords because some viewers do not implement ARCs
Signal polygons are passed as PLANEs
Alphanumeric pad names can be specified instead of just the pin number

The functions were made in cooperation with several PCB manufacturers and a CAM software manufacturer and have been tested under DFM aspects.

Image: Example project in GenCAD format

@@ Line 2: / Line 2: @@
-It allows a "Save" of your *.t3001 file in GenCAD format *.cad:<br>
+*Allows you to save your *.T3001 project in the GenCAD format *.cad
+*Shapes of pads are accurately mapped
+*Solder paste and solderstop mask are included to the output
+*The solderstop mask can have additions
+*Puts out packages "Without FLIP" in the SHAPE call
+*Arcs in the board outline are split into short chords because some viewers do not implement ARCs
+*Signal polygons are passed as PLANEs
+*Alphanumeric pad names can be specified instead of just the pin number
+<br>
+The functions were made in cooperation with several PCB manufacturers and a CAM software manufacturer and have been tested under [https://en.wikipedia.org/wiki/Design_for_manufacturability DFM] aspects.
+<br><br>
+[[Image:Gencad_e2.jpg|none]]Image: Example project in GenCAD format<br>
-[[Image:Gencad_e2.jpg|none]]<br>
+<br><br>
-Alphanumeric pad names are possible unlike before (only pin numbers).