Documentation

Symbole multiple : Différence entre versions

(Page créée avec « If you want to place certain pin groups of a component symbol at different places in the schematic or on different schematic pages, you can create the component symbol so... »)
 
Ligne 12 : Ligne 12 :
 
[[image: multisymbol3.jpg|none|Drawing functions: Open Rectangle]]Figure: Use drawing tool to draw an "Open (unfilled) rectangle"<br><br><br><br>
 
[[image: multisymbol3.jpg|none|Drawing functions: Open Rectangle]]Figure: Use drawing tool to draw an "Open (unfilled) rectangle"<br><br><br><br>
 
[[image: multisymbol4.jpg|none|Rectangles drawn]]Figure: Rectangles drawn as body of the sub symbols (any other shape is possible). <br><br><br><br>
 
[[image: multisymbol4.jpg|none|Rectangles drawn]]Figure: Rectangles drawn as body of the sub symbols (any other shape is possible). <br><br><br><br>
[[image: multisymbol5_e.jpg|none|Double click on a pin: Change pins]]Figure: Double click each Pin and set its function.<br><br><br><br>
+
[[image: multisymbol5_f.jpg|none|Double click on a pin: Change pins]]Figure: Double click each Pin and set its function.<br><br><br><br>
[[image: multisymbol6_e.jpg|none|Use text tool and click at position]]Figure: Use text tool (key ["]) and click above black frame. Select text function ''Symbol name''.<br><br><br><br>
+
[[image: multisymbol6_f.jpg|none|Use text tool and click at position]]Figure: Use text tool (key ["]) and click above black frame. Select text function ''Symbol name''.<br><br><br><br>
[[image: multisymbol7_e.jpg|none|Use text tool and click at position]]Figure: Use text tool (key ["]) and click below black frame. Select text function ''Component value''. <br><br><br><br>
+
[[image: multisymbol7_f.jpg|none|Use text tool and click at position]]Figure: Use text tool (key ["]) and click below black frame. Select text function ''Component value''. <br><br><br><br>
[[image: multisymbol8_e.jpg|none|Variables(!) representing symbol name und component value are set]]Figure: Do the same with the other sub symbol. <br><br><br><br>
+
[[image: multisymbol8_f.jpg|none|Variables(!) representing symbol name und component value are set]]Figure: Do the same with the other sub symbol. <br><br><br><br>
[[image: multisymbol9_e.jpg|none|Mark group]]Figure: Now mark the left sub-symbol with the snap window and press the keyboard key [y]. Confirm merging as a group.<br><br><br><br>
+
[[image: multisymbol9_f.jpg|none|Mark group]]Figure: Now mark the left sub-symbol with the snap window and press the keyboard key [y]. Confirm merging as a group.<br><br><br><br>
[[image: multisymbol10_e.jpg|none|Handle of the sub symbol is set]]Figure: A click to the center place its handle. <br><br><br><br>
+
[[image: multisymbol10_f.jpg|none|Handle of the sub symbol is set]]Figure: A click to the center place its handle. <br><br><br><br>
[[image: multisymbol11_e.jpg|none|Mark group]]Figure: do the same to the right: Mark all elements and press key [y]. Confirm merging as a group.<br><br><br><br>
+
[[image: multisymbol11_f.jpg|none|Mark group]]Figure: do the same to the right: Mark all elements and press key [y]. Confirm merging as a group.<br><br><br><br>
[[image: multisymbol12_e.jpg|none|Handle of the sub symbol is set]]Figure: A click to the center place its handle here too.  <br><br><br><br>
+
[[image: multisymbol12_f.jpg|none|Handle of the sub symbol is set]]Figure: A click to the center place its handle here too.  <br><br><br><br>
[[image: multisymbol13_e.jpg|none|Mark all sub symbols with highlighting square over all]]Figure: Mark all and press key [x], in order to expoet all to the component data base (= save).<br><br><br><br>
+
[[image: multisymbol13_f.jpg|none|Mark all sub symbols with highlighting square over all]]Figure: Mark all and press key [x], in order to expoet all to the component data base (= save).<br><br><br><br>
[[image: multisymbol14_e.jpg|none|press key [x] to save all]]Figure: Enter to the export dialog, assign an appropriate package, save. Done.<br><br>
+
[[image: multisymbol14_f.jpg|none|press key [x] to save all]]Figure: Enter to the export dialog, assign an appropriate package, save. Done.<br><br>
 
<br><br><br><br>
 
<br><br><br><br>
 
[[de: Mehrfachsymbol]][[en:Multisymbol]]
 
[[de: Mehrfachsymbol]][[en:Multisymbol]]

Version du 15 janvier 2021 à 12:22

If you want to place certain pin groups of a component symbol at different places in the schematic or on different schematic pages, you can create the component symbol so that it consists of several sub-symbols (pin groups). The individual sub-symbols can - one after the other - be brought into the schematic and placed separately.

Component symbol consisting of two sub symbols
Figure: Symbol of the four pin component RE1 with two sub symbols a and b.

To make it quick: When drawing (creating) the symbol, you mark such a pin group (sub symbol) and set its own handle cross at inner position using the keyboard key [y]. Do this for all pin groups. Finally, mark everything and save it with [x].



In detail.
We are in schematic view.

Select Pin from the drawing functions
Figure: Use drawing tool to place pins for a new symbol.



Four pins successively placed
Figure: Four pins placed one after the other by click, numbers 1 to 4 are given automatically. At the shaft of the pin, where <nc> shows, later the signal name will show up, as soon as connected.



Drawing functions: Open Rectangle
Figure: Use drawing tool to draw an "Open (unfilled) rectangle"



Rectangles drawn
Figure: Rectangles drawn as body of the sub symbols (any other shape is possible).



Double click on a pin: Change pins
Figure: Double click each Pin and set its function.



Use text tool and click at position
Figure: Use text tool (key ["]) and click above black frame. Select text function Symbol name.



Use text tool and click at position
Figure: Use text tool (key ["]) and click below black frame. Select text function Component value.



Variables(!) representing symbol name und component value are set
Figure: Do the same with the other sub symbol.



Mark group
Figure: Now mark the left sub-symbol with the snap window and press the keyboard key [y]. Confirm merging as a group.



Handle of the sub symbol is set
Figure: A click to the center place its handle.



Mark group
Figure: do the same to the right: Mark all elements and press key [y]. Confirm merging as a group.



Handle of the sub symbol is set
Figure: A click to the center place its handle here too.



Mark all sub symbols with highlighting square over all
Figure: Mark all and press key [x], in order to expoet all to the component data base (= save).



press key [x] to save all
Figure: Enter to the export dialog, assign an appropriate package, save. Done.