Category:Simulation
...
Pages in category "Simulation"
The following 64 pages are in this category, out of 64 total.
A
E
- Edit the circuit
- Error: (SPICE)Syntax errors in global modelcards, subcircuits, components ...
- Error: An (active) analysis (TRANSIENT, DC or AC) in commands is necessary!
- Error: Ground (signal "0") of the simulator used
- Error: Internal error!
- Error: Some components are necessary, but not / no longer available
- Error: Some components(models) refer to missing global model cards or subcircuits
- Error: Some parameters are yet not defined (or bad format)
- Error: Some signal names or component names are not allowed in SPICE (format errors)
- Error: Some SPICE objects are erroneous. (SPICE write error)
- Error: The simulator kernel (sim.exe) could not be run
- Error: The simulator(kernel) has given warnings/errors
H
- Hint: No (active) probe in the commands. All standard voltages and currents are stored!
- Hint: Some components could not be automatically loaded with a default model. Please check!
- Hint: Some signal names or component names could cause problems for external simulators.
- Hint: There are no sources in the schematic. Reference symbols deliver no voltage!
- Hint: There is still no circuit
I
S
- Simple tools
- Simulate the circuit
- Simulate the function Part 1
- Simulate the function Part 2
- Simulation
- Simulation - moving pictures
- Simulation Appendix
- Simulation Assistant
- Simulation Bibliography
- Simulation crash course
- Simulation Error messages
- Simulation Help
- Simulation on different levels
- Simulation pitfalls
- Simulation projects
- Simulation Tutorial
- Simulator
- Spicesyntax
- Start Simulation
W
- Warning: Model selection (level) is not possible or ambiguous for some components
- Warning: No ac source exists (or all amplitudes are zero)
- Warning: Parts of the circuit have no connection to the ground (singular matrix)
- Warning: Some components (models) are not completely imported (power symbols etc.)
- Warning: Some components automatically loaded with default models. Please check!
- Warning: Some components automatically only loaded with IO-models!
- Warning: Some components do not have a model
- Warning: Some models are erroneous
- Warning: Some parameter values have the suffix "M"!
- Warning: The circuit does not have ground (signal name = "GND")
- Warning: Timesteps in the transient analysis are too high (in respect to the period of some sources)
- Help:Where do I have to click to start the simulation
- Writing models